PROGRAMMING AND SOFTWARE
![HAATS H-60](https://tilmilitary.us/wp-content/uploads/2022/08/HAATS-H-60-scaled-e1659380495214.jpg)
Programming & Software
The TDFM-9000 radio offers Project 25 Analog/Digital/Encrypted/Multi-band AM/FM radio transceivers capable of meeting your most demanding operating requirements in both Phase I (FDMA) and Phase II (TDMA) modes. The TDFM-9000 Series consists of multiple models which are configurable to meet each user’s specific requirement. Each model is Dzus panel mount and each unit is completely self-contained (no remote mount box).
TDFM-9000 Series Software Release V2.7.1
This SW (software) upgrade is for the TDFM-9000, TDFM-9200, and TDFM-9300 radios.
This field software upgrade package comprises of the following parts:
- Main MCU SW V2.7.1 (All radios)
- APX interface SW (JM 60) V2.7.1 (All radios)
- Bootloader Update to 1.7.2
- Analog interface SW (JM 60) V1.2.0 (TDFM-9200 & 9300 only)
- VHF Lo Band RF Module SW TLU9 (TDFM-9200 & 9300 only)
- VHF AM RF Module SW TAU3 (TDFM-9200 & 9300 only)
- UHF AM RF module SW TMU1C (TDFM-9200 & 9300 only)
-
Upgrade instructions and factory documents are included in the SW bundle for returning units to service after the upgrades are complete. See the software release notes for specifics.
TDFM-9300 Series
The TDFM-9300 is similar to the TDFM-9000 except that, instead of supporting six RF modules, the TDFM-9300 supports up to four P25 All-Band modules, PLUS one analog module. The available analog modules are:
VHF Lo (30 to 50 MHz),
VHF/AM 118 to 136 MHz (aeronautical band),
UHF/AM 225 to 400 MHz (military band)
T6/All Band Analog Capabilities include:
- Low Band – 30-50MHz FM
- VOR Voice 107-117.9MHz AM
- ATC 118-156MHz AM
- UHF 225-400MHz AM
teraterm programming software v4.75:
From time to time it may be necessary to update the operational software for the TDFM-9000 series of radios. Below you will find a link to download “TeraTerm”, This is a terminal emulator program utilized to access the Virtual Serial Port Technisonic employs to access and update the TDFM-9000 core firmware. Additionally you will find a link to the “TDFM-9000 Series Software Upgrade Procedure” . This document describes in detail the procedure to load new software into the TDFM-9000 series radios. There are several pieces of SW that need to be loaded when upgrading which are always included in any software release. All TDFM-9000 series radios are field upgradeable and only requires a PC, Programming cable and terminal software to load the FW.
![TeraTerm 4.75](https://tilmilitary.us/wp-content/uploads/2022/08/TeraTerm-4.75.jpg)
Contact Us
240 Traders Blvd
Mississauga ON Canada
L47 1W7
(905) 890-2113
(905) 890-5338
Dir. Federal / Military/ OEM Sales & Programs
Jim Huddock / (612) 231-9020